 |
Web Hosting by Netfirms | Free Domain Names by Netfirms |
|
|
|
aircylinders |
| For questions or to purchase, contact John at hauntcylinders at charter dot net. Checks or PayPal accepted. |
| Prices do not include shipping. Fittings are not included. I also have dozens of smaller sizes from 5/16 to 7/8 in the various mounting styles. If you don't see what you need, email me. I may be able to get it. |
| Check out the fittings and brackets that have been added below. |
| Item | Quantity | Manufacturer | Bore | Stroke | Mount | Price/each |
|---|---|---|---|---|---|---|
| A | 9 | Atlas | 9/16 | 12 | nose mount | $14 |
| B | 1 | Atlas | 7/16 | 12 | block mount | $14 |
| C | 2 | Atlas | 3/4 | 12 | pivot or nose mount | SOLD |
| D | 2 | Bimba | 3/4 | 12 | pivot or nose mount | SOLD |
| E | 1 | Atlas | 3/4 | 18 | pivot or nose mount | SOLD |
| F | 2 | Atlas | 1 1/2 | 12 | pivot or nose mount | SOLD |
| G | 2 | ARO | 1 1/2 | 12 | pivot or nose mount | SOLD |
| H | 1 | Atlas | 1 1/2 | 6 | pivot or nose mount | SOLD |
| I | 2 | ARO | 1 1/8 | 18 | nose mount | SOLD |
| Item | Quantity | Manufacturer | Bore | Stroke | Mount | Price/each |
|---|---|---|---|---|---|---|
| A | 2 | Atlas | 9/16 | 6 | pivot or nose mount | SOLD |
| B | 2 | Atlas | 9/16 | 4 | pivot or nose mount | SOLD |
| C | 3 | Bimba | 9/16 | 4 3/4 | pivot or nose mount | $13 |
| D | 2 | Atlas | 7/16 | 4 | pivot or nose mount | SOLD |
| E | 2 | Bimba | 9/16 | 3 1/2 | pivot or nose mount | $13 |
| F | 2 | Atlas | 7/16 | 3 | pivot or nose mount | SOLD |
| G | 1 | Atlas | 9/16 | 2 | pivot or nose mount | $13 |
| H | 2 | Atlas | 7/16 | 2 | pivot or nose mount | SOLD |
| I | 1 | Atlas | 9/16 | 2 | pivot or nose mount | $13 |
| J | 1 | Atlas | 7/16 | 1 | pivot or nose mount | $13 |
| K | 1 | Atlas | 1 1/16 | 3 | pivot or nose mount | $13 |
| L | 2 | Atlas | 3/4 | 2 | pivot or nose mount | $13 |
| M | 4 | Atlas | 7/8 | 1 | pivot or nose mount | $13 |
| Remember that most cylinders and fittings use tapered pipe theads. 1/8NPT is approximately 1/4" in diameter. |
| Item | Quantity | Description | Price/each |
|---|---|---|---|
| A | 20 | Nycoil Push-In Male Elbow 1/8 NPT, 1/4" Tubing | $1.75 |
| B | 14 | Nycoil Push-In Bulkhead Fitting 1/4" Tubing | $1.75 |
| C | 4 | Nycoil Push-In Male Run Tee 1/8 NPT, 1/4" Tubing | $1.75 |
| D | 8 | Nycoil Push-In Male Branch Tee 1/8 NPT, 1/4" Tubing | $1.75 |
| E | 20 | Norgren Push-In Male Elbow 1/4 NPT, 1/8" Tubing | $1.75 |
| Not Shown | 8 | Nycoil Push-In Tee 1/8" Tubing | $1.50 |
| Not Shown | 6 | Norgren/Nycoil Push-In Male Elbow 1/8 NPT, 1/8" Tubing | $1.50 |
| Not Shown | 6 | Norgren Push-In Union 1/8" Tubing | $1.50 |
| Not Shown | 6 | Bimba Flow control elbow with integral check. 1/8"NPT male and female. | $6.75 |
| Not Shown | 6 | Nycoil Flow control elbow with integral check. 10-32 straight thread x 1/4" tubing. This fitting can be seen on the C and E small cylinders above. | $6.75 |
| I have 4 - L071300300 Clevis Ends manufactured by Parker-Atlas. All are new. The diagram below shows the dimensions. They fit any rod with a 5/16-20 thread. The price is $5 each. Each comes complete with clevis, pin, snap rings and locking nut.
|
| Pivot brackets are all manufactured by Parker-Atlas. All are new. The table below shows part number, quantity and price. Refer to the diagram to determine the dimensions of the part. Pay particular attention to dimensions J for pin diameter and dimension K.
|
| Item | Quantity | Description | Price/each |
|---|---|---|---|
| L071320100 | 7 | Pivot Bracket | $1.00 |
| L071320200 | 16 | Pivot Bracket | $2.00 |
| L071320300 | 6 | Pivot Bracket | $2.00 |
| L071320400 | 6 | Pivot Bracket | $3.00 |
| L071320500 | 1 | Pivot Bracket | $3.00 |
